Good Stuff Over at DV.com

DV.com, which started out as a magazine, is not the same as it was during the DV heyday, but their stable of expert commentators is still around churning out good articles. I'm thinking of Adam Wilt who just put out a review of the new Canon XH-A1,which sounds like an awesome camera. Trish and Chris Meyer who recently wrote a good article "Brighter Whites, Richer Colors" about luminance values when working in After Effects. And Jay Rose, their sound guy, who just gave me this good tidbit in this article on echoes that I need to remember:
"Cut down the reflections. Hang sound blankets on the walls so they don't reflect as efficiently. Or spread movers' pads, fiberglass batts, production assistants, or anything else that'll absorb sound. Bunches of helium balloons can calm the echoes from hard domed ceilings."

We've been shooting some stuff in our office that sounds really boomy. Hopefully we can get a hold of some of the stuff that Jay talks about to cut down on the echo. I keep a copy of the Audio for Post Production book by Jay Rose around the office, which I recommend for both beginners and experienced editors who want to dig deep into sound issues.

You do need to register to use DV.com, but I think its worth it because of the quality of their articles.

More on Apple TV & Video Podcasting

While iPhone has stolen all of the headlines (and probably justifably so), I think Apple TV does shine in liberating the video podcast from the computer and bringing it to the TV set. Apple's demo does a good job of approximating what the user interface is like. Click on the Podcast link down their webpage to see more or less what I saw with an actual unit at Macworld.

Granted podcasting is a distant cousin to the internet craze of the moment--YouTube. It would be a challenge to transfer all of the chaos of shared video from the computer to the TV, and I don't think Apple is going to try and do that. For the time being, I still have some hope for the medium of video podcasting to reach a broader audience, especially with consumer-friendly products like the Apple TV, not to mention the video iPod, and coming soon the iPhone.

Random DVD Encoding Tidbit

I picked this up from a Studio Daily video tutorial that I heard about at DVGuru.com. Larry Jordan gives a couple of pointers on working with Compressor for going to DVD.

For audio, use Dolby/AC3 compression if you have more than 20 minutes but tweak the default setting. Larry says to turn off dialog normalization, which ends up lowering the volume on your sound. To do this set dialog normalization to -31. Also turn off the preprocessing by setting it to none. Larry shows you how to do this in the video and also gives a general overview on choosing your settings for compressing for DVD.

Link

Apple TV

Apple gave more details about their entry into the home entertainment market today. Fomerly, iTV, now Apple TV is basically a way to stream movies, TV shows, podcasts, music, and photos from a computer (Mac or PC) to your "widescreen" TV. For some reason, Apple isn't interested in people with TVs that are 4x3 aspect ratio, like myself. The Apple TV can either playback media streamed from a computer or it can play video stored on Apple TV's 40GB hard drive. You add video to the Apple TV's hard drive by syncing it with your Mac or PC using iTunes. The Apple TV supports 802.11b, g, and n wireless standards. I'm guessing g & n will stream video, but b won't, especially not high-def video. Yes, the Apple TV will support video with a resolution of 1280x720. Hopefully, they'll start selling some high-def movies soon on iTunes.

So for Link TV, this is a neat little device to watch our Mosaic podcast. It gets those QuickTime movies that are up on the internet, over to the TV. A cool way to watch Link TV if you don't have satellite TV. But for $299, that's a little pricey. For $399, an Xbox 360 gets you a gaming system with downloadable high-def movives that you can buy and rent. I hope Apple can make their video services more compelling, including high-def content and movie rentals soon. Apple TV should be available in February.

The new iPhone from Apple is really exciting. I won't go into all of the features here, but it is a widescreen video player as well. While it's not going to take over the cellphone market overnight, I could see in 3 years, there being as many iPhones out there as there are iPods now.

Toast 8 Includes TiVo ToGo

Roxio just announced the new version of Toast, their disc burning software. TiVo has collaborated with them to offer the Mac version of TiVo ToGo. The new Toast also includes support for burning Blu-ray media (these are just data discs, not Blu-ray movies in high-def.)

TiVo ToGo allows your Macintosh computer to access the shows on your TiVo over your home network. You copy your tv shows over to your Mac, and then you can burn them to DVD or encode them for your iPod. Pretty nifty.

While Windows users have been able to get a basic version of TiVo ToGo for free, Toast 8 costs $99. A freeware program is also available that allows your Mac to access your TiVo, called TiVoDecode Manager. I'm guessing that Toast is more reliable and much-more user-friendly. One advantage I could see with TiVoDecode Manager is that you aren't stuck with the file export options that Toast leaves you with.

Here are some screenshots at Wired of how Toast works with TiVo.

Link

Region-free DVD Playback with VLC

The free application VLC got some bad press this week when some security vulnerabilities were revealed. But I also wanted to point out something cool that this media player will do. Namely, allow you to play DVD's from anywhere in the world.

DVD's have a region specification. DVD's that you buy will usually only play in one region of the world, such as North America, Europe, China, etc. So if you put in a DVD that you say bought in England, your Mac will most likely pop it out and say that you can't watch it. Here's how to get around that with the help of VLC.

Mac's DVD Player application checks to see which region a DVD is, and if it's not the region of your Mac (in the US, region 1) then the Mac will automatically eject the disc. Frustrating. VLC on the other hand will play a DVD from any region. So how do you keep DVD Player from interrupting your DVD watching? In System Preferences, go the CD's & DVD's preferences. Under the "When you insert a video DVD", choose "Ignore". Now when you insert a DVD, DVD Player will not automatically start up. So instead, you start VLC and you use the "Open Disc" command to start up your DVD.

By the way, you can change the DVD region that your Mac will play, but only a limited number of times. I think it's around 5. The problem is if you decide to change the region to one other than region 1 (i.e., North America), then you could get your machine stuck on another region (i.e.., Europe) when you run of your chances to change the DVD region. So if you Mac asks you to change the DVD region, say cancel.

Here's MacUpdate's listing of VLC if you want to download. BTW, Macs will also play back DVD's in the PAL format, unlike your run-of-the-mill DVD player. If you have a disc in PAL which does not have a region code, then DVD Player will play it with no problems.

Sonnet Tempo E4P = Mac Pro HD Expansion

Consider this a plug, not for a product, but for AMUG (Arizona Mac Users Group.) They do awesome and incredibly thorough reviews with a focus on storage. They are really on top of the products for external SATA storage. In this review, AMUG puts a Sonnet PCIe card through its paces and get over 700 MB/sec. throughput out of it. Wow.

So SATA is great for uncompressed HD work, but for the standard-def work I do, I still prefer the G-RAID over external SATA most of the time. The $299 cost of this 4-port PCI-E SATA hosts card makes for a pricey entry point into SATA storage. While cheaper 2-port cards are available, 2 drives aren't enough to justify filling up a PCI-E slot. OK, so there's port multiplier storage devices (means you can have more than 1 drive per SATA port), but those aren't cheap either. I don't know what the future of firewire is, but for the moment SATA is not the slam-dunk replacement that I was hoping it would be.


Link

ScopeBox

Excuse me while I point out a cool looking production tool. It's a new program called ScopeBox. It basically is the Mac version of DV Rack (now owned by Adobe.) ScopeBox will take an input from a camera and acts like a field montior, a vectorscope, and a waveform monitor. It also does other things with the signal, like RGB parade, audio meters, and it will record direct to your hard drive. There's a DV version on sale for $299 until 1/15--that's $100 off the normal price. There's a HD version too, but unfortunately no HDV support yet. A free trial version is available. Here's a hands-on review of ScopeBox that I found at DVGuru.com.

In the free category there's a simple DV monitoring app called FlipFlop that will display a DV input from firewire (no HDV support either.) Of course you can always just use Final Cut's Capture window to do some monitoring on a computer.

Free, Simple Logging Utility

Not a bad away to log, transcribe, and it's free. This program basically allows you to grab timer info from a QuickTime movie and then type away to comment on that point in a movie. You can also slow down playback and pause with keyboard commands if you are transcribing. You can use the original media (e.g., DV files) or compressed files that are easier to move around (e.g., MPEG4, H.264, or even MP3.) I checked out the Mac version and there's even one for Windows. Registration is required to download at dvcreators.net. I wish this thing read the timecode from the files, but when its free you can't really complain.


Link

QuickTime Security Vulnerabilty

This seems like a pretty worrisome security alert for QuickTime. A malicious QuickTime file could take over your system (Mac or PC). You could come across one of these movies on a webpage or in an email. The good news: no malicious QuickTime movies have been found in the wild. The bad news: code has been released to the public to exploit this flaw. Nothing to panic about yet. Let it be a reminder not to open attachments unless you know who it comes from and the attachment is explained in the email.
Link

The Wonderful World of XML & Metadata

This stuff is pretty deep, but interesting. The article is called "What is XML and what does it mean for Final Cut Studio users?". OK, I'm not going to try and describe what XML is, but let me point out some cool applications that use XML.

Spherico makes a plugin that will convert text into FCP titles called Title Exchange Pro. This could help with creating subtitles if you already had a translation (hello, Latin Pulse.)

Another cool looking application is program called Final Log. It's used for logging and transcribing and will get info from and send info to FCP through XML. Final Log is standalone or works with Filemaker Pro.

Also there's CatDV. It seems like a good media asset management system for video that's moderately priced and has good FCP integration. I need to look more into this.

Link

About this Blog

As the description of the top says, this blog is about video post-production. There's so much great information on the Web about video, and I hope this blog can be a guide to information that is relevant to video editing, post-production, Final Cut Pro, and Macintosh stuff. I'm getting a lot of the information that I will post here from a couple of great blogs--DVguru.com and HD for Indies.com. I encourage you to read those blogs if you have the time.

There's no real structure to this. I'm just going to post info as I come across it on the Web or as I learn something in my work that seems relevant to others. Hopefully the blog will help in our efforts to keep on top of the constantly-changing technology involved in post-production.

Get the Specs for your Mac

More on hardware upgrading. Mactracker is a nifty little, free app. It seems to list every piece of hardware that Apple has ever made with all of its hardware specs. This is helpful if you want to upgrade your RAM or hard drive or add a PCI card. You also can get system info for a Mac you are using with About This Mac info under the Apple Menu.

Mactracker also has some fun stuff (e.g., it will play the "death chime" for the Power Mac G3, which unfortunately I have heard before.)


Link

Tutorial on Mac Pro Upgrades

This is a good video tutorial on doing basic upgrades on the new Mac Pro's. This is the kind of stuff that I do on our Macs--upgrade the RAM, add a hard drive, add a PCI card. This only applies for the new Intel Mac towers but the info is similar to what you would get for other Mac tower computers. Although adding a hard drive to a G5 can be much trickier than this.

The only thing I think it overlooks is emphasizing taking precautions against static electricity. A discharge of static electricity can fry your circuits. Especially this time of year when the humidity is low and people are wearing wool, there's lots of static electricy flying around. Precautions should be taken anytime you open up a computer or an piece of electronics. I always use a static wrist strap when I work with computer components. I also touch a metal cover to an empty PCI slot before I touch any computer components (that's assuming that there are covers for the empty PCI slots.)

Oh, the video also doesn't say basic stuff, like make sure the computer is off and unplugged before you open it up. Basically doing hardware upgrades isn't that hard on Mac towers, but there's always a possibility that you can mess up the computer if something goes wrong.

The video is done by dvcreators.net and I found the link over at DVGuru.com. I noticed that the Brightcove Video wasn't working. You can also get the video as part of DV Gear Talk podcast on 12/11/06.

Link to iTunes Podcast Feed
Link to Brightcove Video

Easy RSS Feed Subscription (for Macs)

It's easy to subscripe to this blog using Safari's RSS feed capabities. That way you don't have to visit the page to know if it's been updated. Safari will check the page for updates automatically. Here's how to subscribe to the RSS feed for this blog using Mac's Safari.

On the blog's main page, click on the RSS icon on the right side of the address field, which is at the top of the page. You will then see the RSS feed in your brwoser window, which just looks like a stripped down version of the blog without much formatting.

The way I like to subscribe to an RSS feed is to add it to my bookmarks bar at the top of the page. To do this, drag the icon on the left side of the address field (usually a grey box) onto your bookmarks bar (that's the area just below the address field.) When there's a new post, Safari will add a number next to the bookmark, notifying you of how many unread posts are available at that feed (e.g. "Hype Link (1)" ).

So if you can make space for me in your bookmark bar, it's an easy way to know when there's a new post on the Hyper Link blog.